Indirizzo:

Jinan, Shandong, Cina

Orario d'ufficio:

8:30-17:30 (lun-ven) 

Numero di telefono:
E-mail:

Geomembrana HDPE

$0.20 - $3.90

Al metro quadro o al metro

The optimal choice for projects such as landfills, ponds, and water tanks requiring effective anti-seepage measures is the HDPE geomembrane.

HDPE geomembrane, also known as high-density polyethylene membrane or HDPE liner, is primarily categorized into two types: HDPE smooth geomembrane and single HDPE textured geomembrane. HDPE, a highly crystalline, non-polar thermoplastic resin, exhibits exceptional resistance to a wide range of domestic and industrial chemicals.

QIVOC HDPE geomembrane sheet is crafted from original HDPE resin, enriched with a blend of additives including antioxidants, UV absorbers, anti-aging agents, stabilizers, and modifiers. By carefully adjusting the proportions of these additives, the resulting HDPE membrane demonstrates robust resistance to environmental stress cracking, low-temperature embrittlement, aging, ultraviolet exposure, and corrosion. Additionally, it offers an extensive operating temperature range (±60°C) and boasts a prolonged service life of up to 60 years.

100000 disponibili

COD QIVOC-0002 Categoria

Descrizione

HDPE Liner Parameter

This is the product parameter of QIVOC HDPE geomembrane, including HDPE smooth surface geomembrane and HDPE smooth and textured surface geomembrane.

ArticoloSmooth suface HDPE geomembraneSmooth and textured suface HDPE geomembrane
Spessore (mm/mil)0.75/29.531.0/39.371.5/59.062.0/78.740.75/29.531.0/39.371.5/59.062.0/78.74
Densità(g/m2)≥0.94≥0.94
Prestazioni di trazione  
Resistenza allo snervamento (sollecitazione), N/mm1215233012152330
Resistenza alla rottura (sollecitazione), N/mm2228435719243748
Allungamento a yiled(%)1313
Allungamento a rottura (%)700700
Resistenza allo strappo ad angolo retto (N)9512518724995125187249
Resistenza alla perforazione (N)270350530700270350530700
Resistenza alle cricche da stress ambientale(h)400400
Nero di carbonio  
Contenuto di nerofumo (gamma), %2.0-3.02.0-3.0
Dispersione di nerofumoNove delle 10 aree di osservazione dovrebbero appartenere al 1° o al 2° livello, mentre il 3° livello non dovrebbe essere presente più di una volta.Nove delle 10 aree di osservazione dovrebbero appartenere al 1° o al 2° livello, mentre il 3° livello non dovrebbe essere presente più di una volta.
Altezza della struttura (mm) 0.25
Tempo di induzione dell'ossidazione (OIT)  
OIT standard (min)100100
Alta pressione OIT(min)400400
85℃ invecchiamento in forno (valore medio minimo) per formula  
Mantenimento dell'OIT standard dopo 91 giorni di cottura (%)5555
Ritenzione dell'OIT ad alta pressione dopo 91 giorni di cottura (%)8080
Resistenza ai raggi UV  
Dopo 1600 ore di radiazioni ultraviolette, la ritenzione dell'OIT standard (%)5050
Dopo 1600 ore di radiazioni ultraviolette, la ritenzione di OIT ad alta pressione (%)5050
Prestazioni di infragilimento da impatto a bassa temperatura -70℃passaggiopassaggio
Stabilità dimensionale (%)±2±2

If you need customized products, please refer to the following parameters.

QIVOC, as a premium HDPE Liner supplier and manufacturer, offers competitive HDPE Liner prices including cost per square meter and a price list tailored to your budget. No matter what kind of HDPE waterproofing membrane you need, we can provide you with unbeatable prices and superior quality. We as an experienced HDPE geomembrane supplier and manufacturer ensure reliability and durability. From jual geomembrane HDPE to wholesale HDPE liners, we offer unmatched value and service.

Contact us to submit your requirements and QIVOC will provide you with cost-effective solutions.

Thickness customized: 0.2mm – 3.0mm (7.87mil – 118.11mil) Of course, I also offer the following special HDPE lining thicknesses: 30mil, 40mil, 60mil, 80nil, 500micron…

Lunghezza personalizzata: 50m, 100, 150m o qualsiasi lunghezza

Larghezza personalizzata: 1m - 8m, o qualsiasi lunghezza

Personalizzazione della superficie: liscia, texture su un solo lato, texture su due lati

Personalizzazione del colore: nero, bianco, verde, qualsiasi altro colore

Quantità minima ordinabile: 1 metro quadrato

Metodo di pagamento: LC, T/T, Western Union

Capacità di fornitura: 90.000 metri quadrati al giorno

Tempo di consegna: 7-15 giorni

Conventional packaging: HDPE geomembrane lined roll packaging woven bag or according to your requirements.

Dimensioni del rotolo caricato nel container: Larghezza 5,8 m X Lunghezza 50 m-100 m.

HDPE Geomembrane Sheet Advantages

As a HDPE geomembrane manufacturer with 20 years of experience, we take pride in the following advantages of our products:

Product Features:

  1. Ultra-High Waterproofing Performance: Exceptional anti-seepage coefficient at (1×10-17 cm/s).
  2. Wide Temperature Range: Excellent heat resistance and cold resistance, operating in temperatures ranging from a high of 110℃ to a low of -70℃.
  3. Chemical Stability: Demonstrates good chemical stability, resisting corrosion from strong acids, alkalis, and oils.
  4. Tensile Strength and Adaptability: Exhibits robust tensile strength and elongation at break, suitable for various harsh geological and climatic conditions. Strong adaptability to uneven geological settlement, meeting the requirements of high-standard engineering projects.
  5. Weather Resistance and Anti-Aging Properties: Strong weather resistance and anti-aging capabilities, allowing extended exposure while maintaining original performance.
  6. Environmentally Friendly Material: Crafted from high-quality virgin plastic and carbon black particles without any preservatives.
  7. An environmentally friendly building material, suitable even for use as a food packaging bag.

Advantages of Use:

  1. Simple and Fast Construction: Construction is straightforward and swift, requiring only proper leveling. No need for a concrete cushion, eliminating the requirement for a structural concrete curing period.
  2. Resistance to Base Deformation: Resilient to base deformation with good elongation at break, capable of withstanding foundation settlement or deformation.
  3. Easy Restoration: After use, simply store it away and backfill it to restore it to its original state.

High Density Polyethylene Geomembrane Applications

HDPE membrane, owing to its exceptional performance characteristics, has found widespread application in various engineering projects, delivering dependable anti-seepage and soil protection effects. Its primary applications include:

Special Environment Anti-Seepage:
Landfills
Sewage treatment plants
Power plant tailings treatment
Chemical plants
Fertilizer plants
Sugar factory sewage tailings treatment
Non-ferrous metallurgy, sulfuric acid ponds
Tailings treatment in diverse industrial settings

Infrastructure Projects:
Subways
Basements
Tunnels
Roof linings in specialized environments

Anti-Seepage Paving:
Horizontal anti-seepage paving
Vertical anti-seepage paving for reservoirs, canals, and dams

Water Containment:
Anti-seepage for seawater and freshwater containment
Anti-seepage for breeding farms and aquaculture

These applications showcase the versatility and reliability of high density polyethylene liner in providing effective anti-seepage solutions for a wide range of engineering projects.

"Avete una domanda? Fate clic sul pulsante qui sotto per contattarci direttamente e ricevere un'assistenza personalizzata. "

Siate certi che risponderemo alla vostra richiesta entro 2 ore.

HDPE Membrane Installation Procedures

Using and installing HDPE waterproofing membrane is straightforward and convenient. Below is a standard construction process.

  1. Pre-installation Site Preparation: Begin by thoroughly cleaning the construction area, and removing sharp objects and debris to maintain a smooth foundation.
  2. Precise Measurement for Cutting: Measure the length and width of the HDPE liner sheet accurately, ensuring precise cutting tailored to project requirements. Confirm comprehensive coverage of the targeted project area.
  3. Laying and Wrinkle Avoidance: Lay the cut HDPE waterproofing sheet in the designated area to prevent wrinkles.
  4. Seam Welding for Oversized Areas: In cases where the construction area exceeds the width of the HDPE membrane sheet, seam welding becomes necessary. Utilize a dedicated welding machine for seam processing to ensure optimal impermeability.
  5. Secure Fixation with Strips and Nails: Employ fixed strips, nails, etc., to secure the edges and joints of the HDPE geo membrane. Ensure the HDPE impermeable liner remains stable and doesn’t shift during use.

Precautions for Installation of High Density Polyethylene Liner

While the construction of high-density polyethylene HDPE liners is relatively simple, attention to the following considerations is crucial during installation. Here are specific precautions for HDPE impermeable membrane installation:

  1. Temperature Requirements:
    Ensure a temperature above 5℃.
    Tighten the geomembrane at low temperatures and loosen it at high temperatures.
    Avoid construction during strong winds, rain, or snow.
  2. Test Welding:
    Perform on-site test welding at the beginning of the welding process.
    The overlap width of the sample should be no less than 10cm.
    Conduct on-site peeling and shearing tests using a tensile machine.
  3. Seam Treatment:
    Heat welding is used for seam treatment.
    The overlap width of seams between membranes is generally not less than 10cm.
    Arrange welds parallel to the maximum slope, following the slope direction.
    Pay continuous attention to the welding machine’s operation, fine-tuning speed and temperature as needed.
  4. Lengthwise Splicing:
    When the HDPE geomembrane liner length is insufficient, lengthwise splicing is necessary.
    Weld transverse seams first and then longitudinal seams.
    Transverse welds over 50cm apart should form a T-shape and cannot cross.
    Stagger and overlap adjacent hdpe liner welds as much as possible.
    Minimize cross-shaped nodes; use an extrusion welding machine to strengthen the intersection points of the longitudinal die to the weld seam.
  5. Laying:
    Aim to lay from top to bottom, minimizing welds to save raw materials while ensuring quality.
    Flatten and tightly attach the space between membranes and between membranes and the base surface.
    Ensure the laying is not too tight, avoiding wrinkles. Use sandbags to hold down the HDPE plastic liner after laying a certain thickness to prevent the wind from blowing it up.
  6. Special Locations:
    In corners and deformed areas, shorten joint lengths.
    Except for special requirements, avoid welds within 1.5 meters of the top slope or stress concentration area on slopes with a slope greater than 1:6.

Progetti recenti

Scoprite i nostri recenti progetti per i clienti ed esplorate la gamma di assistenza personalizzata e su misura che offriamo. Condividete le vostre esigenze e riceverete la soluzione ideale.

Recensioni

Ancora non ci sono recensioni.

Recensisci per primo “HDPE Geomembrane”

Il tuo indirizzo email non sarà pubblicato. I campi obbligatori sono contrassegnati *

Avete domande sui prodotti?

Consultare QIVOC online

Se avete domande o desiderate ulteriori informazioni sui nostri prodotti o servizi, compilate il modulo. Ci metteremo in contatto con voi entro 2 ore.